If the result indicates FAILED, prompt action is necessary as it indicates imminent drive failure.If the result indicates PASSED, it signifies that the drive is in good health and performing optimally, providing reassurance and peace of mind.Once the tests are finished, examine the results to determine the health status of the drive: It is important to note that these tests may require a significant amount of time to complete due to their thorough nature. support:Īfter executing a test, carefully monitor its progress using the appropriate command to retrieve its status. Print information of a drive, including S.M.A.R.T. Smartctl is a utility that is used to control and monitor S.M.A.R.T. (Prints all SMART info for 3rd ATA disk of the 1st enclosure Of the 1st channel on the 1st HighPoint RAID controller) (Prints all SMART info for the SATA disk attached to the 3rd PMPort (Prints all SMART info for 3rd ATA disk on 3ware RAID controller) Smartctl -attributes -log=selftest -quietmode=errorsonly /dev/sda Smartctl -test=long /dev/sda (Executes extended disk self-test) Smartctl -smart=on -offlineauto=on -saveauto=on /dev/sda Smartctl -all /dev/sda (Prints all SMART information) TEST: offline, short, long, conveyance, force, vendor,N, Read and replace drive database from FILEĪnd then /var/db/smartmontools/drivedb.h] None, nologdir, samsung, samsung2, samsung3, xerrorlba, swapidĭrive-specific presets: use, ignore, show, showall Set display OPTION for vendor Attribute N (see man page) v N,OPTION, -vendorattribute=N,OPTION (ATA) Scttempint,N, scterc, devstat, defects, ssd, TYPE: error, selftest, selective, directory, Set output format for attributes: old, brief, hex Show device SMART vendor-specific Attributes and values = DEVICE FEATURE ENABLE/DISABLE COMMANDS =Įnable/disable automatic offline testing on device (on/off)Įnable/disable Attribute autosave on device (on/off)Įnable/disable/change device setting: aam, apm,ĭsn, lookahead, security-freeze, No check if: never, sleep, standby, idle (see man page) Set action on bad checksum to one of: warn, exit, ignore Tolerance: normal, conservative, permissive, verypermissive Set smartctl quiet mode to one of: errorsonly, silent, noserialĪta, scsi, nvme, sat, usbcypress, usbjmicron, usbprolific, usbsunplus, sntjmicron, sntrealtek, intelliprop,N, jmb39x,N, jms56x,N, marvell, areca,N/E, 3ware,N, hpt,L/M/N, megaraid,N, aacraid,H,L,ID, cciss,N, auto, test Scan for devices and try to open each device Get device setting: all, aam, apm, dsn, lookahead, security, Show words and bits from IDENTIFY DEVICE data (ATA) Print license, copyright, and version information and exit ![]() ![]() Root # smartctl -h smartctl 7.2 r5155 (local build)Ĭopyright (C) 2002-20, Bruce Allen, Christian Franke, Usage: smartctl device
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |